Learning

Valves

https://contest.techbriefs.com/2015/entries/machinery-automation-robotics/5581

Comments

Post a Comment

Popular posts from this blog

OP-Vent

https://op-vent.stanford.edu/ A different take: without an ambu bag. Claims: A mechanical ventilator design developed by Dally can be assembled quickly, using off-the-shelf parts with a total cost of around $400 — making it an accessible and affordable alternative to traditional, dedicated ventilators, which can cost $20,000 or more. Includes just two central components — a solenoid valve and a microcontroller. The design is called the OP-Vent , and in the video below you can see how bare-bones it is in terms of hardware compared to existing alternatives, including some of the other more complex emergency-use ventilator designs developed in response to COVID-19. Has been developed using input from mechanical engineers and doctors, including Dr. Andrew Moore, a chief resident at Stanford University and Dr. Bryant Lin, a medical devices expert and company co-founder. Can be assembled in as little as five minutes, and is small enough to fit in a Pelican case for easy transpor...
Read more

Breathless Journalism

from https://old.reddit.com/r/pics/comments/foo7qm/italian_guy_designed_a_3d_printable_valve_to_turn/ [–] Vandimal88 184 points 14 hours ago   It looks like it would essentially work as non-invasive positive airway pressure similar to CPAP or BIPAP. That still uses positive pressure to force air into the lungs but without a tube that goes down the trachea past the vocal cords. There are many limitations on this kind of ventilation compared to intubation. With intubated patients you can control parameters such as positive end expiratory pressure (PEEP) which helps stent open the alveoli when they fill with fluid (acute respiratory distress syndrome) which is a common complication from COVID-19. You can’t reliably control all of these parameters with non-invasive positive airway pressure because it relies on the patient to be able to take their own breaths. They can tire out or if their mental status deteriorates and they are not able to maintain their airway ...
Read more

Medtronics released the schematics ,manufacturing jigs and cad files for their PB560 ventilator system

Forwarded from University College Cork .... In these difficult times medical devices such as ventilators/respirators are in very high demand. Please help us in mobilizing and facilitating production of these devices that are (or could become) desperately needed in hospitals throughout the world to save lives. Based on global high demand of ventilators and respirators, Medtronic made available plans to facilitate production of ventilators. In this interview, Omar Ishrak (Medtronic CEO), tells a great deal about different grades of ventilators, how production is being increased, and where they are going: https://www.cnbc.com/video/ 2020/03/25/medtronic-ceo-omar- ishrak-on-ramping-up- ventilator-production.html In case you know factories and/or students that want a COVID-related project, they can download the plans for this Ventilator and produce them: https://www.medtronic.com/us- en/e/open-files.html?cmpid= vanity_url_medtronic_com_ openventilator_Corp_US_ Co...
Read more